Secvest 2WAY Wireless Universal Module right view Secvest 2WAY Wireless Universal Module front view
||||

Secvest 2WAY Wireless Universal Module (Art. no. FU8211)

We expressly recommend having this product installed by a certified specialist.

Special product features:

  • NEW: Supports perimeter warnings, e.g. when outside motion detectors are used
  • Versatile module for use in every alarm system
  • Converts wired systems into hybrid alarm systems (allowing them to be operated with wireless detectors)
  • Repeating by bi-directional 2WAY components (increases the wireless range)
  • For Secvest generation wireless sensors
  • Allows the implementation of 6 different functions

The Secvest 2WAY wireless accessory module is an optional accessory for your Secvest. The wireless accessory module (WAM) can also be integrated into wired systems, such as the Terxon SX and Terxon MX, allowing additional wireless components to be used in wired alarm systems. The module features 6 main functions:

  • Repeater module (doubles the range): The WAM forwards signals from up to 8 sensors to the alarm panel. This virtually doubles the wireless transmission range.
  • Output modules (e.g. home automation): Up to 4 outputs (switching capacity 500 mA) in the WAM are activated for programmed events.
  • Transmission/reception module: In addition to the 4 outputs, the alarm inputs on the WAM (1 x alarm, 1 x sabotage) are put to use.
  • Sounder module: The WAM can be used to connect an external sounder (siren & flashing light) to the Secvest (a wired siren will then also respond to wireless signals).
  • Siren transmitter/receiver: The WAM can be used to integrate a wireless siren into a wired alarm system.
  • Reception module: Using a WAM, 8 wireless components can be integrated into any wired system. The WAM receives the signals from the wireless detector, and activates the alarm system. This allows the Secvest detectors to be integrated into the Terxon alarm control panel.
The WAM is powered by a 12 V power supply unit.

Technical data:

Art. no.: FU8211
Dimensions: (WxHxD) 122x208x42 mm
Connections: 4 x transistor relay (NO/NC), max. switch capacity 500 mA, 24 V DC, R=2 / 1 x RJ12 for control of the siren
Display: 10 LEDs
Battery type: 6V DC, 1.2Ah
Width: 122 mm
Radio frequency: 868
Transmission power: 10
Housing material: ABS
Height: 208 mm
Length: 42 mm
Power consumption: 0,84
Max. receiving range (outdoors): 100 m
Max. receiving range (building): 30 m
Max. sending range (outdoors): 100 m
Max. sending range (building): 30 m
Modulation: FM FM / AM
Net weight: 0.33 kg
Backup power supply: Yes
Tamper monitoring: Yes
Voltage monitoring: Yes
DC voltage supply: 12 V
Power consumption: 70 mA

Scope of delivery:

  • 1x
  • 1x
  • 1x

General Downloads:

Required accessories:

Secvest Power Supply, 12 V, 1.5 A
FU3822
Bedienelemente

Control devices and extensions

The Secvest 2WAY can be easily operated. It can be armed and disarmed by remote control, button, PIN code, chip key, the turn of a key, or using a mobile phone. The response in the form of a voice announcement, an optical or acoustic signal lets you know the status of the system. ...
Other interesting products from the category Control devices and extensions