Terxon MX 8-zone Wired Extension front view right Terxon MX 8-zone Wired Extension front view
NCP
||||

Terxon MX 8-Zone Wired Extension (Art. no. AZ4130)

We expressly recommend having this product installed by a certified specialist.

Special product features:

  • 4-wire bus connection
  • Enables individual identification of detectors (advisable in areas where safety and security are important)
  • Allows clustering in logical areas
  • Minimises cabling work

The Terxon MX 8-zone Wired Extension is an extension module for the Terxon MX. Using this module, you can extend your alarm system by up to 8 wired alarm zones. The 8 zones of the wired expansion are connected to the motherboard of the Terxon MX via 4-wire bus cables. You can connect up to 3 expansion modules (wireless or wired) to your existing alarm center. The Terxon MX can thus be expanded to up to 32 zones. The additional alarm zones are freely programmable and tampering-protected. The type of wiring – NC or DEOL – is left up to you, but it must be the same for all zones. Via a jumper on the circuit board, you can assign the zones of the expansion module (9 to 16, 17 to 24 and 25 to 32).

Technical data:

Art. no.: AZ4130
Dimensions: (WxHxD) 128x183x35 mm
Connections: 4-wire bus
Number of wired zones: 8
Width: 128 mm
Housing material: ABS
Height: 183 mm
Length: 35 mm
Power consumption: 30
Net weight: 0.33 kg
Tamper monitoring: Yes
DC voltage supply: 12 V
Power consumption: 30 mA
Certifications: INCERT, VSÖ, F&P, NCP

Scope of delivery:

  • 1x Terxon MX 8-zone wired extension

General Downloads:

Erweiterungen Terxon MX/LX

Terxon MX/LX extensions

The Terxon MX and Terxon LX wired and hybrid alarm systems can be retrofitted with wireless modules. Compatibility with the Secvest 2WAY alarm components in terms of function and appearance enables seamless integration into an alarm system. With the Terxon 2WAY modules, operation is also possible using bidirectional components. ...
Other interesting products from the category Terxon MX/LX extensions