We expressly recommend having this product installed by a certified specialist.
The acoustic Secvest 2WAY wireless glass breakage detector is a component of the Secvest 2WAY and is also suitable for the Terxon with a wireless expansion module. It reacts to the specific noise of breaking windows. Breakage of glass is detected and reported to the alarm control panel. The wireless glass breakage detector has a sensor monitoring the entire room. It should be aimed directly at the window pane to be monitored. The best position is approx. 2-3 meters from the front of the glass, the maximum distance is 6 meters. The detection range of the detector may be reduced by interfering noises from the near surroundings and by the immediate "window surroundings" (curtains, flowers, interior window sills, burglary-resistant glass, etc.). The wireless glass breakage detector reacts to the sound frequency of breaking glass (low and high-frequency sounds). This occurs in two stages: a sharp rise in amplitude while the glass breaks, falling off of the amplitude caused by the glass pieces falling down and hitting the floor. First the breaking glass, then the impact of the pieces of glass: The wireless glass breakage detector only triggers an alarm if these criteria are met. This prevents false alarms.