Secvest 2WAY Wireless Keypad front view right Secvest 2WAY Wireless Keypad front view right
||||

Secvest 2WAY Wireless Keypad (Art. no. FU8110)

We expressly recommend having this product installed by a certified specialist.

Special product features:

  • For arming/disarming the alarm panel
  • Integrated proximity key fob reader with optional external power supply
  • Possible to switch outputs
  • Power supply via battery and external source (12 V)
  • Power supply using batteries and external power supply (12 V)
  • LEDs for displaying the current system status

The Secvest 2WAY wireless keypad is an optional accessory for the Secvest 2WAY. You can operate your system from any wireless keypad using your PIN code. If the wireless keypad is supplied externally with 12V, arming and disarming by proximity chip key is also possible. Up to 4 control units can be integrated into the alarm system. Arranged in various parts of your building, these expansion modules guarantee additional convenience. The Secvest 2WAY can be armed or disarmed directly on the wireless keypad, without having to go back to the central alarm panel each time. Entering an additional code becomes redundant. The four buttons are programmed on the central Secvest 2WAY alarm panel. In addition to the internal arming or the arming of individual sub-sections, you can also activate an output via this keypad, e.g. the garage door. Due to protection class IP54, you can also use the wireless keypad outdoors.

Technical data:

Art. no.: FU8110
Dimensions: (WxHxD) 135x135x30 mm
Connections: 12V switch terminal, battery compartment
Battery type: 3 V CR2 lithium battery
Width: 135 mm
Radio frequency: 868,6625 MHz
Transmission power: 10
Housing material: ABS
Height: 135 mm
Length: 30 mm
Max. battery life: 2 year(s)
Max. operating temperature: 55 °C
Max. humidity: 94 %
Max. receiving range (outdoors): 100 m
Max. receiving range (building): 30 m
Max. sending range (outdoors): 100 m
Max. sending range (building): 30 m
Min. operating temperature: -10 °C
Modulation: FM FM / AM
Installation location: Indoors and protected outdoor areas
Net weight: 0.3 kg
Tamper monitoring: Yes
IP protection class: 54
Security level: 2
Voltage monitoring: Yes
DC voltage supply: 3/12 V
Environmental class: II
Certifications: INCERT, F&P, NCP

Scope of delivery:

  • 1x Wireless control panel
  • 1x Battery 3 V CR2 Li (FU2990)
  • 1x User guide

General Downloads:

Certificates:

Required accessories:

Secvest Power Supply, 12 V, 1.5 A
FU3822
Bedienelemente

Control devices and extensions

The Secvest 2WAY can be easily operated. It can be armed and disarmed by remote control, button, PIN code, chip key, the turn of a key, or using a mobile phone. The response in the form of a voice announcement, an optical or acoustic signal lets you know that status of the system. ...
Other interesting products from the category Control devices and extensions